Instant Message
Email
Phone
In Person
Search Results
|
Bison
#: |
SEL Reference TA403.H3 1974 v.2 |
|
Title: |
CRC HANDBOOK OF MATERIALS SCIENCE, vol. 2 |
|
Author: |
C.T. Lynch, CRC Press, 1974 |
|
Properties: |
Mechanical; Physical; Thermal |
|
Materials: |
Alloys; Aluminum; Aluminum compounds; Ceramics; Composites; Glass; Inorganic chemicals; Metals; Oxides; Refractory materials; Steel |
|
Identifiers: |
Annealing point temperature; Austenilize temperature; Coefficient of thermal expansion; Conductivity; Creep strength; Curie temperature; Density; Dielectric strength; Dissipation factor; Electrical resistivity; Elongation; Expansion; Fatigue strength; Hardness; Heat capacity; Heat of formation; Hot working temperature; Impact strength; Loss factor; Melting range; Modulus of elasticity; Modulus of rigidity; Normalized temperature; Permeability; Poisson's ratio; Refractive index; Rupture strength; Softening point temperature; Specific gravity; Tensile strength; Thermal conductivity; Volume resistivity; Working point temperature; Yield strength |
|
Note: |
This handbook includes information on such materials as nuclear materials, graphites, polymers, aluminum, ferrous alloys, nickel, and glass. The physical properties of these materials are tabulated and phase diagram charts and standards are included. Each volume is thoroughly indexed. |
 |
|
|
Bison
#: |
SEL Reference TA403.4 S482 1995 |
|
Title: |
CRC PRACTICAL HANDBOOK OF MATERIALS SELECTION |
|
Author: |
A. Shackelford, CRC Press, 1995 |
|
Properties: |
Thermal; Thermodynamic; Mechanical; Electrical; Corrosion; Optical; Chemical |
|
Materials: |
Alloy Cast Iron; Tool Steel; Gray Cast Iron; Wrought Aluminum Alloy; Treated Ductile Iron; Malleable Iron Casting; Various Ceramics; Polymers |
|
Identifiers: |
Abrasion Resistance; Arc Resistance; Area Reduction; Bulk Modulus; Coefficients of Static Friction; Compression Modulus; Compression Poisson's Ratio; Compressive Strength; Compressive Yield Strength; Corrosive Medium; Corrosive Rate; Critical Temperature; Dielectric Strength; Diffusion Activation Energy; Dissipation Factor; Electrical Permisivity; Electrical Resistivity; Elongation; Elongation at Yield; Fatigue Strength; Flammability; Flexural Strength; Hardness; Heat of Formation; Impact Energy; Impact Strength; Melting Point; Microhardness; Modulus of Elasticity in Compression; Modulus of Elasticity in Flexure; Modulus of Elasticity in Tension; Modulus of Rupture; Poisson's Ratio; Refractive Indices; Reverse Bending Fatique Limit; Resistivity; Shear Moduli; Shear Strength; Specific Heat; Tangent Loss; Tensile Moduli; Tensile Strength; Thermal Conductivity; Thermal Expansion; Torsion Poisson's Ratio; Torsional Moduli; Torsional Shear Strength; Transmission Range; Transparency; Water Absorption; Yield Strength; Young's Modulus |
|
Note: |
Information on professional societies, educational institutions, and employment opportunities in the field of material science/engineering. Selected property tables for metals, ceramic/glass, and polymers. |
|
|
|
Bison
#: |
SEL Reference TA403.E497 1987 v.4 |
|
Title: |
ENGINEERED MATERIALS HANDBOOK: CERAMICS AND GLASSES, vol. 4 |
|
Author: |
S.J. Schneider, ASM International, 1987 |
|
Properties: |
Crystallographic; Mechanical; Physical; Thermal |
|
Materials: |
Ceramics; Glasses |
|
Identifiers: |
Bend strength; Bulk modulus; Coefficient of thermal expansion; Comprehensive strength; Crystallography; Density; Dielectric constant; Dielectric strength; Elasticity; Enthalpy; Flexural strength; Fracture toughness; Free energy of formation; Hardness; Heat capacity; Lattice parameters; Load; Loss factor; Melting point; Modulus of elasticity; Modulus of rigidity; Poisson's ratio; Relative density; Rigidity; Stability range; Surface tension; Tensile strength; Theoretical density; Thermal conductivity; Thermal expansion; Viscosity; |
|
Note: |
Includes major sections on every aspect of the technology, production and synthesis of ceramic powders, including forming and sintering processes; final shaping; machinery; techniques; glass processing methods; testing, characterization and non-destructive evaluation; failure analysis and fractography; design considerations for advanced ceramics; and engineering properties including crystallographic and thermodynamic characteristics. |
|
|
|
Bison
#: |
SEL Reference R857.C4 M47 1984 |
|
Title: |
METAL AND CERAMIC BIOMATERIALS, vols. 1-2 |
|
Author: |
Paul Ducheyne, CRC Press, 1984 |
|
Properties: |
Crystallographic; Mechanical; Physical; |
|
Materials: |
Biomaterials; Ceramics; Metals |
|
Identifiers: |
Annealing temperature; Bend strength; Boiling point; Coefficient of thermal expansion; Composition; Compressive strength; Dimensions; Electrical conductivity; Elongation; Fatigue strength; Flexural strength; Fracture toughness; Hardness; Heat capacity; Lattice type; Melting point; Modulus of elasticity; Oxidation potential; Poisson's ratio; Porosity; Softening temperature; Tensile strength; Thermal conductivity; Yield strength |
|
Note: |
Volume 1 discusses the structure of metals and ceramics, and the more recent surface analytical techniques for metals and ceramics. Volume 2 analyzes various properties. Strength-related behavior is treated first. In addition, mechanical behavior and biocompatibility are examined. |
|
|
|
Bison
#: |
SEL Reference TA403.4.P7 1989 |
|
Title: |
PRACTICAL HANDBOOK OF MATERIALS SCIENCE |
|
Author: |
C.T. Lynch, CRC Press, 1989 |
|
Properties: |
Chemical; Electrical; Physical; Thermal; |
|
Materials: |
Alloys; Ceramics; Composites; Elements; General chemicals; Graphite; Metals; Minerals; Polymers; Refractory materials; Superconductors; Wood |
|
Identifiers: |
Annealing point; Arc resistance; Atomic weight; Boiling point; Bond length; Coefficient of cubical expansion; Compressive strength; Critical temperature; Crystal structure; Density; Dielectric constant; Dielectric strength; Electrical resistivity; Entropy; Flammability; Flexural modulus; Flexural strength; Freezing point; Half life; Hardness; Heat capacity; Heat deflection temperature; Heat of fusion; Heat of transition; Ionization potential; Izod impact; Loss factor; Melting point; Melting range; Modulus of elasticity; pH; Porosity; Refractive index; Softening point; Solubility; Specific gravity; Strain point; Temperature coefficient; Tensile modulus; Tensile strength; Thermal conductivity; Thermal neutron absorption; Transition temperature; Valence; Vapor pressure; Water absorption; Yield strength; |
|
Note: |
This book is a supplement to the original CRC HANDBOOK OF MATERIALS SCIENCE. Several sections, such as those dealing with composite materials, have been updated to stay abreast of the advances in the field. A complete revision of the materials information section has been included to provide the reader with current information on the federal laboratory and information services in the field of materials science and engineering. |
|
|
|
Bison
#: |
SEL Reference TJ1075.T755 1997 |
|
Title: |
TRIBOLOGY DATA HANDBOOK |
|
Author: |
Ricard E. Booser, CRC Press, 1997 |
|
Properties: |
Physical; Gas; Mechanical; Material; Tribological |
|
Materials: |
Polyalphaolefins; Organic Esters; Polyalkylene Glycols; Phosphate Esters; Silicones; Perfluoroalkylpolyethers; Polychlorotrifluoroethylenes; Polybutenes; Vegetable Oils; Greases; Solid Lubricants; Metal Films; Organic Polymers; Ceramics; Metals; Alloys |
|
Identifiers: |
Bulk modulus; Contact geometry; Contact pressure; Density; Dynamic seals; Dynamic viscosity; Elastohydrodynamic; Fire point; Flash point; Friction coefficient; Kinematic viscosity; Mean free path; Pour point; Pressure-viscosity coeefficient; PV limit; Rockwell hardness; Seal face; Specific heat; Specific volume; Thermal conductivity; Thermal expansion coefficient; Viscosity; Wear coefficient |
|
Note: |
Information on lubricant properties; lubrication specifications for various types of equipment and applications; material properties; surface and wear characterization; toxicology/environmental issues; monitoring/maintenance/failure patterns; and component performance and design data. Appendices include material hardness tables, tests and data; viscosity conversion factors; and unit conversion factors. |
|
|
